My kit had no bootloader flashed.
Austrian/Germany Group Buy I and II (both closed)
-
- Posts: 60
- Joined: 30 Dec 2021, 21:30
Re: Austrian/Germany Group Buy I and II (both closed)
Got my kits today, thanks a lot for the effort, neatly packed!
Janko s57l
Janko s57l
-
- Posts: 4
- Joined: 31 Dec 2021, 07:28
Re: Austrian/Germany Group Buy I (closed) and II (open)
hi
did I miss something?
am I on the list?
how, how much and where to pay?
73 de Tom, DG6TOM
vy 73 de Tom, DG6TOM / KC6TOM
-
- Posts: 2
- Joined: 22 Mar 2022, 07:32
Re: Austrian/Germany Group Buy I and II (both closed)
Hi Tom,
see post #1 (update 5.4.)
73 de Andreas
see post #1 (update 5.4.)
73 de Andreas
-
- Posts: 17
- Joined: 15 Feb 2022, 07:03
-
- Posts: 17
- Joined: 15 Feb 2022, 07:03
Re: Austrian/Germany Group Buy I and II (both closed)
Hi Dieter,
Hi everyone from buygroup 1,
I guess Q4 and Q5 are intentionally not populated on the Front of the RF board?
The components were not included in my kit.
EDIT: Sorry. I found out that those are just alternatives to the 3 BS170 for future experiments.
All good
73 Joe
Hi everyone from buygroup 1,
I guess Q4 and Q5 are intentionally not populated on the Front of the RF board?
The components were not included in my kit.
EDIT: Sorry. I found out that those are just alternatives to the 3 BS170 for future experiments.
All good
73 Joe
- Attachments
-
- RF Board missing Q4 and Q5.jpg (173.5 KiB) Viewed 4973 times
- DH2LAB
- Posts: 51
- Joined: 08 Mar 2022, 01:39
- Location: Kiel
- Contact:
Re: Austrian/Germany Group Buy I and II (both closed)
Q4 and Q5 on the RF-Board are spare Footprints. They are for future experiments and do not need to be placed or sourced !!!
You can read it on DL2MAN-Page.
73 de Matt, DH2LAB
-
- Posts: 17
- Joined: 15 Feb 2022, 07:03
Re: Austrian/Germany Group Buy I and II (both closed)
Thanks Matt,
I should have searched first . Updated my post already.
All good. Thanks
73 Joe
I should have searched first . Updated my post already.
All good. Thanks
73 Joe
-
- Posts: 10
- Joined: 14 Feb 2022, 15:44
Missing bootloader
Dear all,
About the missing bootloader:
Does this mean that nearly 100 hams each have to buy an Arduino UNO?
Or is there a smarter solution?
Maybe even one that is close to the spirit of the group buy?
("The Bootloader should be burnt onto the devices by the Group Buy Organizer.")
Suggestions welcome!
TU 73/72
de Uli
P.S.: If all else fails: I could volunteer to buy an Arduino UNO and (if it works with my kit) to program others as well.
About the missing bootloader:
Does this mean that nearly 100 hams each have to buy an Arduino UNO?
Or is there a smarter solution?
Maybe even one that is close to the spirit of the group buy?
("The Bootloader should be burnt onto the devices by the Group Buy Organizer.")
Suggestions welcome!
TU 73/72
de Uli
P.S.: If all else fails: I could volunteer to buy an Arduino UNO and (if it works with my kit) to program others as well.
- DH2LAB
- Posts: 51
- Joined: 08 Mar 2022, 01:39
- Location: Kiel
- Contact:
Re: Missing bootloader
The OE-DL group buy here is closed anyway.
And the USBAsp is cheaper than sending it back and forth postage.
73 de Matt, DH2LAB
-
- Posts: 10
- Joined: 14 Feb 2022, 15:44
Re: Austrian/Germany Group Buy I and II (both closed)
Dear Matt,
Thank you for the advice concerning the USBAsp!
It is cheaper than the Arduino UNO by a factor of 5 or so.
You are right of course: at this price sending the kits around wouldn't make sense...
73 de Uli
Thank you for the advice concerning the USBAsp!
It is cheaper than the Arduino UNO by a factor of 5 or so.
You are right of course: at this price sending the kits around wouldn't make sense...
73 de Uli
-
- Posts: 17
- Joined: 15 Feb 2022, 07:03
Re: Austrian/Germany Group Buy I and II (both closed)
Hello,
Did someone else has this problems with unstable operation (mainly on changing frequency or navigating menus) ?
I know that at least one other participant has exactly the same problem. See separate thread:
See this thread: viewtopic.php?t=344
Did someone else has this problems with unstable operation (mainly on changing frequency or navigating menus) ?
I know that at least one other participant has exactly the same problem. See separate thread:
See this thread: viewtopic.php?t=344
- DH2LAB
- Posts: 51
- Joined: 08 Mar 2022, 01:39
- Location: Kiel
- Contact:
Re: Austrian/Germany Group Buy I and II (both closed)
It could be that the decoder bounces. To prevent this, there is normaly a code in the programming, as far as I know.OE5JFE wrote: ↑27 Apr 2022, 11:13 Hello,
Did someone else has this problems with unstable operation (mainly on changing frequency or navigating menus) ?
I know that at least one other participant has exactly the same problem. See separate thread:
See this thread: viewtopic.php?t=344
You can also solder debouncing capacitors to the pins.
But I think that the C32 and C33 are here already intended for this.
But I do not know, if this is here the problem.
73 de Matt, DH2LAB
-
- Posts: 17
- Joined: 15 Feb 2022, 07:03
Re: Austrian/Germany Group Buy I and II (both closed)
Okay that would be a simple addition.
That sounds like a solution for missing or dropped encoder rotations? But that is not the problem.
Or would that explain why the software completely locks and resets? One can hear that the relais get reset due to a "restart / reboot"
That sounds like a solution for missing or dropped encoder rotations? But that is not the problem.
Or would that explain why the software completely locks and resets? One can hear that the relais get reset due to a "restart / reboot"
-
- Posts: 10
- Joined: 14 Feb 2022, 15:44
OLED modification correct?
Dear all,
I know that this group buy is long closed. As, however, this question is specific to the OLED display supplied with the OE/DL Group Buy I, it is probably best adressed here:
I just wanted to check whether one of you can confirm that the following modification is correct. (I am not completely sure, as the component specifications and positions are not exactly the same as in Manuel's documents and video. For instance is Q1 the same as U2?)
Thank you for your help!
73
Uli
P.S.: I used an enamel wire, so it is isolated except for the ends of course.
I know that this group buy is long closed. As, however, this question is specific to the OLED display supplied with the OE/DL Group Buy I, it is probably best adressed here:
I just wanted to check whether one of you can confirm that the following modification is correct. (I am not completely sure, as the component specifications and positions are not exactly the same as in Manuel's documents and video. For instance is Q1 the same as U2?)
Thank you for your help!
73
Uli
P.S.: I used an enamel wire, so it is isolated except for the ends of course.
- Attachments
-
- images-001.jpg (227.35 KiB) Viewed 4596 times
-
- Posts: 17
- Joined: 15 Feb 2022, 07:03
Re: Austrian/Germany Group Buy I and II (both closed)
That's how I did it and the display works.
-
- Posts: 10
- Joined: 14 Feb 2022, 15:44
Re: Austrian/Germany Group Buy I and II (both closed)
Thanks very much, Joe, this is a great help!
Apart from the fact that you did a much nicer job with the wire, electrically both should be the same.
(So my mistake must be on the mainboard...)
TU ES 73
Uli
Apart from the fact that you did a much nicer job with the wire, electrically both should be the same.
(So my mistake must be on the mainboard...)
TU ES 73
Uli
Users browsing this forum: No registered users and 0 guests