Error during upload firmware

Post Reply
Luca66
 

Posts: 123
Joined: 16 Apr 2022, 13:02

Error during upload firmware

Post by Luca66 »

Update

I have attached the screenshot

Unfortunately I also ran into the error STK500_RECV (): PROGRAMMER IS NOT RESPONDING. The Oled when it turns on shows the serial number. I'm confused and don't understand what I can do to fix it. Give me your help.
Attachments
Compress_20220424_123111_1023.jpg
Compress_20220424_123111_1023.jpg (120.41 KiB) Viewed 1498 times
User avatar
DH2LAB
 

Posts: 51
Joined: 08 Mar 2022, 01:39
Location: Kiel
Contact:

Re: Error during upload firmware

Post by DH2LAB »

Hello,

use AVRDUDESS-2.13-portable.
Try other USB cables, if possible not as long.
I had same problem with a cable that was too long.
73 de Matt, DH2LAB
Luca66
 

Posts: 123
Joined: 16 Apr 2022, 13:02

Re: Error during upload firmware

Post by Luca66 »

Thank you for the answer. I only have two cables but they are the usual length of about 1m. I also tried the portable version of avrdudess but without success. Did you have the same problems on your unit?
User avatar
DH2LAB
 

Posts: 51
Joined: 08 Mar 2022, 01:39
Location: Kiel
Contact:

Re: Error during upload firmware

Post by DH2LAB »

My problems were solved with a shorter cable. Now 100% OK.
Look again at the driver and set Baud Rate to 115200. Also in Device Manager.
Compare each step with https://dl2man.de/3b-trusdx-firmware/
Good luck!
73 de Matt, DH2LAB
Luca66
 

Posts: 123
Joined: 16 Apr 2022, 13:02

Re: Error during upload firmware

Post by Luca66 »

Unfortunately, even shortening the cable I do not get any results. I will try to reinstall the bootloader. Thank you for your help.
AC9YY
 

Posts: 133
Joined: 21 Mar 2022, 00:04
Location: Illinois, USA

Re: Error during upload firmware

Post by AC9YY »

What does hitting the Detect button return?
heinrich
 

Posts: 4
Joined: 06 Jan 2022, 18:47

Re: Error during upload firmware

Post by heinrich »

It returns the signature of the mcu:
Detected 1e950f = ATmega328P
Faraaz VK4JJ
 

Posts: 215
Joined: 30 Dec 2021, 21:56

Re: Error during upload firmware

Post by Faraaz VK4JJ »

heinrich wrote: 26 Apr 2022, 10:36 It returns the signature of the mcu:
Detected 1e950f = ATmega328P
Connections are find. Try reducing your baud rate.
Post Reply

Users browsing this forum: No registered users and 1 guest