PL/EU Group Buy - SN3AK - I (completed) II (full)
-
- Posts: 2
- Joined: 04 Jan 2022, 14:04
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hello Adam,
If it is still possible, please include me to the order for 2 full kits without the housing. Shipment to Poland.
Cześć Adam,
Jeżeli to możliwe chciałem dołączyć do zamówienia 2 zestawy bez obudowy, wysyłka do Polski.
73
Jakub
If it is still possible, please include me to the order for 2 full kits without the housing. Shipment to Poland.
Cześć Adam,
Jeżeli to możliwe chciałem dołączyć do zamówienia 2 zestawy bez obudowy, wysyłka do Polski.
73
Jakub
-
- Posts: 32
- Joined: 30 Dec 2021, 21:47
- Contact:
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Congratulations on the initiative!
Please count me with 1 (one) complete set (including 3D housing).
It should not be a problem with transport in Romania. I regularly receive components from tme.eu through GLS at a decent price (<6E).
Thanks!
Please count me with 1 (one) complete set (including 3D housing).
It should not be a problem with transport in Romania. I regularly receive components from tme.eu through GLS at a decent price (<6E).
Thanks!
Last edited by yo8rcd on 04 Jan 2022, 21:55, edited 2 times in total.
73!
Costin, YO8RCD
Costin, YO8RCD
-
- Posts: 3
- Joined: 31 Dec 2021, 20:16
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hello Adam,
A very good initiative from you.
Please add me to your list with one kit without any printed case.
I am from Bucharest, ROMANIA.
Best regards,
Aurelian YO3FAA
A very good initiative from you.
Please add me to your list with one kit without any printed case.
I am from Bucharest, ROMANIA.
Best regards,
Aurelian YO3FAA
-
- Posts: 1
- Joined: 31 Dec 2021, 16:42
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
I am interested in 1 kit, complete with enclosure and all items.
Shipping to the Italy.
73 IK3MLH Alberto
Shipping to the Italy.
73 IK3MLH Alberto
-
- Posts: 3
- Joined: 02 Jan 2022, 10:05
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hi Adam
i need one complete kit to Germany including enclosure , thanks de DL5LB Giuseppe 73
i need one complete kit to Germany including enclosure , thanks de DL5LB Giuseppe 73
-
- Posts: 1
- Joined: 04 Jan 2022, 15:24
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hi Adam,
Please count me in for a kit.
Best Regards
Jonas Sanamon - SM4VEY
Please count me in for a kit.
Best Regards
Jonas Sanamon - SM4VEY
-
- Posts: 47
- Joined: 31 Dec 2021, 19:09
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hi Markus,EA5HQ wrote: ↑04 Jan 2022, 12:19Hi AdamAdam SN3AK wrote: ↑04 Jan 2022, 11:19
Great news Marcus!
Please think how much would be 1 enclosure when we order ~50 of them (consider shipment to me)
I am not the expert in 3D printing materials, from your description I would choose PET-G, but would like to ask you and the Group to share opinion / advise. To make things simple, I would prefer we chose one type of printed enclosure. Is there any choice of color? (I personally like yellow as DL2MAN's avatar's picture)
My draft plan for enclosure is like that:
1) Adam(me) collects orders once list is closed
2) Adam collects money for enclosure and sends to you
3) Marcus prints enclosure and send to Adam
4) Adam prepares and sendspackage with JLCPCB assembled PCB + Digikey/Mouser parts + enclousre
The Group: let me know if you have any CONSTRUCTIVE comment to the plan.
Cheers,
Adam
I shall print one kit and make some notes on how may grams of material are needed and how much time it takes to print. For sure, 50 sets of enclosures will take a LONG time to print - I'm guessing 50 days elapsed!
I ordered some orange filament from Amazon that, to my eyes, looks like that which appeared in DL2MAN's videos. I don't want to commit to offering different colours since I'll end up with many partly-used spools of filament.
I've noticed that not all colleagues that have posted here have requested enclosures. Perhaps some people want to print their own (in their own colour, etc.). If I can reduce my commitment to more like 25, then that would be nice.
Cheers
Marcus EA5HQ
Please make one enclosure for measurement - for sure there will be need for it. I fully agree with you that "one model/color fits all" is good strategy. I also would like to minimize risk of mistake when I will package them.
Regarding timing, I think we can consider 2 shipments (25 + 25 later) or even more (4?) if the shipment
does not increase price significantly. When calculate price, please take all costs into account with some rounding up - I think ~50 cases, 50 days it takes some bother to you.
Regarding number of enclosures - I will collect real orders soon, with personal data etc. Then I will let you know what the exact number is ordered.
Let's be in touch on progress from both sides.
Regards,
Adam SN3AK
-
- Posts: 4
- Joined: 04 Jan 2022, 17:37
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hi,
please, count me for a kit without 3D housing.
Best regards,
Andres, EA7HQL.
please, count me for a kit without 3D housing.
Best regards,
Andres, EA7HQL.
-
- Posts: 47
- Joined: 31 Dec 2021, 19:09
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Dear All,
THE LIST IS CLOSED - WE ALREADY HAVE 70 DECLARATION
Here is list of declaration. I will order kits, parts and enclosures to Group #1.
Regarding Group #2, if somebody resign I will add persons from this group (FIFO)
Let me check how the the whole process looks like - then I will let you know if I will manage to order for Group 2.
To be sure, I will order PCBs described by Manuel here >> https://dl2man.de/1-trusdx-group-buy/
What next?
1) Adam will prepare survey and ask you to provide personal data needed [Due: by this weekend]
2) I will calculate the total cost of 1kit, including Markus's enclosure [Due: hope by the weekend]
3) 3 days period to resign if somebody change his mind, does not accept cost
4) Order PCB with SMD assembly [next week]
5) Odder missing parts, TDH mounted from DigiKey / Mouser [ next week ]
6) Purchase strong bubble envelopes, packaging materials etc. [next week]
7) Package & ship to you, Priority / Registered email or small package [when receive PCB,parts,enclosures)
Please let me know (priv) if you have any suggestion to the plan.
73, Adam SN3AK
The list:
Group Sign No of kits Enclosure?
1 SN3AK 3
1 on7en 1
1 SP7Q 1
1 CT2FZI 1
1 dl1bax 2
1 sm0fpr 3
1 DB7BH 1
1 GI4ONL 1 (enclosure)
1 OK2JIQ 1 (enclosure)
1 SV5FRI 1
1 IS0EIR 2
1 LZ2FDI 1
1 ArekP 1
1 sp3bkr 2
1 DL3GJ 1
1 LY2H 1 (enclosure)
1 odzag 2
1 Marian 2
1 DO1WJS 1
1 SP9TKW 2
1 CT7ARQ 1
1 ON4MI 1
1 CT7ARQ 1
1 OE3FSA 1 (noenclosure)
1 EA5HQ 2
1 pa4hjh 2 (no
1 IN3ERI 1 (enclosure)
1 F4HKA 1 (enclosure)
1 EA3GRN 1 (no
1 DJ0DX/OE6CLD 1
1 DO1OKE 1
1 DO6DOC 2 (enclosure)
1 DO1JOE 1 (no
1 DL9TX 4 (no
2 DL9TX 1 (no
2 DG6TOM 1 (enclosure)
2 EA5DKU 1
2 S56RLU 1 (enclosure)
2 PA3RNV 1 (enclosure)
2 DF6MZ 1 (no
2 pa3glk 1 (enclosure)
2 DJ2MX 2 (1
2 IK2JTU 2 (no
2 sv5fri 1 (enclosure)
2 f4jet 1
2 SP9LIS 2
2 yo8rcd 1
2 YO3FAA 1
2 IK3MLH 1 (enclosure)
2 DL5LB 1 (enclosure)
2 SM4VEY 1
THE LIST IS CLOSED - WE ALREADY HAVE 70 DECLARATION
Here is list of declaration. I will order kits, parts and enclosures to Group #1.
Regarding Group #2, if somebody resign I will add persons from this group (FIFO)
Let me check how the the whole process looks like - then I will let you know if I will manage to order for Group 2.
To be sure, I will order PCBs described by Manuel here >> https://dl2man.de/1-trusdx-group-buy/
What next?
1) Adam will prepare survey and ask you to provide personal data needed [Due: by this weekend]
2) I will calculate the total cost of 1kit, including Markus's enclosure [Due: hope by the weekend]
3) 3 days period to resign if somebody change his mind, does not accept cost
4) Order PCB with SMD assembly [next week]
5) Odder missing parts, TDH mounted from DigiKey / Mouser [ next week ]
6) Purchase strong bubble envelopes, packaging materials etc. [next week]
7) Package & ship to you, Priority / Registered email or small package [when receive PCB,parts,enclosures)
Please let me know (priv) if you have any suggestion to the plan.
73, Adam SN3AK
The list:
Group Sign No of kits Enclosure?
1 SN3AK 3
1 on7en 1
1 SP7Q 1
1 CT2FZI 1
1 dl1bax 2
1 sm0fpr 3
1 DB7BH 1
1 GI4ONL 1 (enclosure)
1 OK2JIQ 1 (enclosure)
1 SV5FRI 1
1 IS0EIR 2
1 LZ2FDI 1
1 ArekP 1
1 sp3bkr 2
1 DL3GJ 1
1 LY2H 1 (enclosure)
1 odzag 2
1 Marian 2
1 DO1WJS 1
1 SP9TKW 2
1 CT7ARQ 1
1 ON4MI 1
1 CT7ARQ 1
1 OE3FSA 1 (noenclosure)
1 EA5HQ 2
1 pa4hjh 2 (no
1 IN3ERI 1 (enclosure)
1 F4HKA 1 (enclosure)
1 EA3GRN 1 (no
1 DJ0DX/OE6CLD 1
1 DO1OKE 1
1 DO6DOC 2 (enclosure)
1 DO1JOE 1 (no
1 DL9TX 4 (no
2 DL9TX 1 (no
2 DG6TOM 1 (enclosure)
2 EA5DKU 1
2 S56RLU 1 (enclosure)
2 PA3RNV 1 (enclosure)
2 DF6MZ 1 (no
2 pa3glk 1 (enclosure)
2 DJ2MX 2 (1
2 IK2JTU 2 (no
2 sv5fri 1 (enclosure)
2 f4jet 1
2 SP9LIS 2
2 yo8rcd 1
2 YO3FAA 1
2 IK3MLH 1 (enclosure)
2 DL5LB 1 (enclosure)
2 SM4VEY 1
-
- Posts: 23
- Joined: 03 Jan 2022, 11:56
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hi AdamAdam SN3AK wrote: ↑04 Jan 2022, 17:19
Hi Markus,
Please make one enclosure for measurement - for sure there will be need for it. I fully agree with you that "one model/color fits all" is good strategy. I also would like to minimize risk of mistake when I will package them.
Regarding timing, I think we can consider 2 shipments (25 + 25 later) or even more (4?) if the shipment
does not increase price significantly. When calculate price, please take all costs into account with some rounding up - I think ~50 cases, 50 days it takes some bother to you.
Regarding number of enclosures - I will collect real orders soon, with personal data etc. Then I will let you know what the exact number is ordered.
Let's be in touch on progress from both sides.
Regards,
Adam SN3AK
My 3D printer software (Cura) tells me 46g of filament. Call that 50. Let's say I get 20% print #fails (typical for me). So allow 60g. Let's say I can get 16 sets from a 1kg spool of filament. My current favourite source for filament is Amazon Basics which I believe is made by Mitsubishi in Netherlands. It's quite a good price / quality / availability combination for me here in rural Spain. It's currently around €22 a 1kg reel. So, just in filament, the enclosure should be about €1.38. Let's say my printer uses 200W on average while printing, and the Cura software says 5h 16m to print - I'll round that up to 6. Electricity in Spain is eye-wateringly expensive at the moment compared to what it used to be just 2 years ago, but I'll say that it costs €0.60 in electricity to print. Allow some wear and tear on the printer at €0.50 per set. Plus €1 per kit for the shipping when combined for the batch of 30. Grand total current estimate is, say, €3.50 per enclosure in costs.
Cheers
Marcus
-
- Posts: 23
- Joined: 03 Jan 2022, 11:56
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Printer filament will be orange, for everybody, unless I get major complaints.
https://www.amazon.es/gp/product/B07T6WMYWV
73 Marcus EA5HQ
https://www.amazon.es/gp/product/B07T6WMYWV
73 Marcus EA5HQ
-
- Posts: 23
- Joined: 03 Jan 2022, 11:56
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Oh, another thing, I'm going to peel these prints straight from the printer, do a quick visual inspection and throw them in bags for sending. I'm not going to be doing the fiddly little filing / sanding / edge finishing / tapping of threads - the things that anybody who's ever had anything to do with filament 3D printers will be very familiar with and will know that can sap up a lot of time, especially if I had to do that for 25 or 50 sets!
As I said, I will do one (or however many it takes) test prints to make sure that I'm printing something that will fit together (hoping that the PCB will fit when we get it, which it should, but I can do some caliper measurements just to check).
73 Marcus EA5HQ
As I said, I will do one (or however many it takes) test prints to make sure that I'm printing something that will fit together (hoping that the PCB will fit when we get it, which it should, but I can do some caliper measurements just to check).
73 Marcus EA5HQ
-
- Posts: 4
- Joined: 01 Jan 2022, 11:15
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hello Adam.
Thanks for the coordination.
Please add me for one kit (without housing) and shipping to Serbia (Belgrade).
73
Tomo YT5CQ
Thanks for the coordination.
Please add me for one kit (without housing) and shipping to Serbia (Belgrade).
73
Tomo YT5CQ
-
- Posts: 7
- Joined: 04 Jan 2022, 20:27
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hello Adam,
Please add me to List #2
- 2 Units please both with housing
Thanks for your organization of the group and your work.
Best 73
Frank, DJ2FL
Please add me to List #2
- 2 Units please both with housing
Thanks for your organization of the group and your work.
Best 73
Frank, DJ2FL
-
- Posts: 2
- Joined: 03 Jan 2022, 20:43
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hello Adam,
Can you include me to the order for 1 full kits without the housing ?
Shipment to France.
73. Chris. F4FLU
Can you include me to the order for 1 full kits without the housing ?
Shipment to France.
73. Chris. F4FLU
-
- Posts: 2
- Joined: 31 Dec 2021, 11:40
- Location: JO53IW
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hi Adam,
i would like to get 1 kit, with printed 3d housing, if you ship to Germany.
Vy 73
Patrick
DL3XN
i would like to get 1 kit, with printed 3d housing, if you ship to Germany.
Vy 73
Patrick
DL3XN
73 de DL3XN
-
- Posts: 6
- Joined: 30 Dec 2021, 20:17
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hello!EA5HQ wrote: ↑04 Jan 2022, 18:25Hi AdamAdam SN3AK wrote: ↑04 Jan 2022, 17:19
Hi Markus,
Please make one enclosure for measurement - for sure there will be need for it. I fully agree with you that "one model/color fits all" is good strategy. I also would like to minimize risk of mistake when I will package them.
Regarding timing, I think we can consider 2 shipments (25 + 25 later) or even more (4?) if the shipment
does not increase price significantly. When calculate price, please take all costs into account with some rounding up - I think ~50 cases, 50 days it takes some bother to you.
Regarding number of enclosures - I will collect real orders soon, with personal data etc. Then I will let you know what the exact number is ordered.
Let's be in touch on progress from both sides.
Regards,
Adam SN3AK
My 3D printer software (Cura) tells me 46g of filament. Call that 50. Let's say I get 20% print #fails (typical for me). So allow 60g. Let's say I can get 16 sets from a 1kg spool of filament. My current favourite source for filament is Amazon Basics which I believe is made by Mitsubishi in Netherlands. It's quite a good price / quality / availability combination for me here in rural Spain. It's currently around €22 a 1kg reel. So, just in filament, the enclosure should be about €1.38. Let's say my printer uses 200W on average while printing, and the Cura software says 5h 16m to print - I'll round that up to 6. Electricity in Spain is eye-wateringly expensive at the moment compared to what it used to be just 2 years ago, but I'll say that it costs €0.60 in electricity to print. Allow some wear and tear on the printer at €0.50 per set. Plus €1 per kit for the shipping when combined for the batch of 30. Grand total current estimate is, say, €3.50 per enclosure in costs.
Cheers
Marcus
We organized a group of 10 in Romania (closed on December 23). I listed 8 boxes. So the estimates are correct. The only problem is, at least for me, the size. I checked with a DL2MAN sandwich board and it needed a 1.01 size increase. Not much, but enough not to fit the plates in the box. The problem may be that I used PLA, from my printer or ... I don't know from where. So the recommendation is to check the first box very carefully!
Ady / YO8AZQ
-
- Posts: 215
- Joined: 30 Dec 2021, 21:56
Re: PL/EU Group Buy - SN3AK - **FULL/CLOSED FOR ORDERS**
Moderator comment:
PLEASE NOTE THIS GROUP BUY IS CLOSED. IT IS NOT ACCEPTING NEW ORDERS.
Please do not post beyond this post with requests like 'one for me' etc.
------------------------------------------------------------------------------------------------
PLEASE NOTE THIS GROUP BUY IS CLOSED. IT IS NOT ACCEPTING NEW ORDERS.
Please do not post beyond this post with requests like 'one for me' etc.
------------------------------------------------------------------------------------------------
-
- Posts: 47
- Joined: 31 Dec 2021, 19:09
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Dear Ady YO8AZQ - thanks for information.YO8AZQ wrote: ↑04 Jan 2022, 22:26Hello!EA5HQ wrote: ↑04 Jan 2022, 18:25Hi AdamAdam SN3AK wrote: ↑04 Jan 2022, 17:19
Hi Markus,
Please make one enclosure for measurement - for sure there will be need for it. I fully agree with you that "one model/color fits all" is good strategy. I also would like to minimize risk of mistake when I will package them.
Regarding timing, I think we can consider 2 shipments (25 + 25 later) or even more (4?) if the shipment
does not increase price significantly. When calculate price, please take all costs into account with some rounding up - I think ~50 cases, 50 days it takes some bother to you.
Regarding number of enclosures - I will collect real orders soon, with personal data etc. Then I will let you know what the exact number is ordered.
Let's be in touch on progress from both sides.
Regards,
Adam SN3AK
My 3D printer software (Cura) tells me 46g of filament. Call that 50. Let's say I get 20% print #fails (typical for me). So allow 60g. Let's say I can get 16 sets from a 1kg spool of filament. My current favourite source for filament is Amazon Basics which I believe is made by Mitsubishi in Netherlands. It's quite a good price / quality / availability combination for me here in rural Spain. It's currently around €22 a 1kg reel. So, just in filament, the enclosure should be about €1.38. Let's say my printer uses 200W on average while printing, and the Cura software says 5h 16m to print - I'll round that up to 6. Electricity in Spain is eye-wateringly expensive at the moment compared to what it used to be just 2 years ago, but I'll say that it costs €0.60 in electricity to print. Allow some wear and tear on the printer at €0.50 per set. Plus €1 per kit for the shipping when combined for the batch of 30. Grand total current estimate is, say, €3.50 per enclosure in costs.
Cheers
Marcus
We organized a group of 10 in Romania (closed on December 23). I listed 8 boxes. So the estimates are correct. The only problem is, at least for me, the size. I checked with a DL2MAN sandwich board and it needed a 1.01 size increase. Not much, but enough not to fit the plates in the box. The problem may be that I used PLA, from my printer or ... I don't know from where. So the recommendation is to check the first box very carefully!
Ady / YO8AZQ
Dear Markus,
Thank you for update. I will round up the enclosure cost to 5 EUR. I do not see you added cost of shipment or not.
Please send picture of the first printed enclosure to this forum - let's all see it before they take decision.
I though about the total price and came up with following conclusions:
1 kit with assembled SMD parts + all remaining parts - 50 EUR
Additional cost for shipment out of Poland (EU only) - 6 EUR
Enclosure 5 EUR
My calculation are based on information from DL2MAN, Polish Post, Allegro ("polish ebay").
I do my best to fit in this budget, assuming that PL Tax/Duties are comparable with DE/EU ones.
What is next step:
Expect personal data survey on weekend.
Best regards,
Adam
For those who send registration after closure - I will add you on the list for Group 2.
-
- Posts: 2
- Joined: 05 Jan 2022, 00:16
Re: PL/EU Group Buy - SN3AK - **FULL/CLOSED FOR ORDERS**
So I guess the Chinese do something better than we.... (apart from building quality )Faraaz VK4JJ wrote: ↑05 Jan 2022, 01:12 Moderator comment:
PLEASE NOTE THIS GROUP BUY IS CLOSED. IT IS NOT ACCEPTING NEW ORDERS.
Please do not post beyond this post with requests like 'one for me' etc.
------------------------------------------------------------------------------------------------
The big difference is that this is not a commercial venture, but as we all can see, the product is a very wanted one and almost begs to get commercial. Maybe a hint for the intellectual owner: get an investor to sell it to. It will get more expensive, but at least available for everyone (as long as chip supplies don't get stuck).
Just my 5 cents..
-
- Posts: 5
- Joined: 31 Dec 2021, 16:03
Re: PL/EU Group Buy - SN3AK - **FULL/CLOSED FOR ORDERS**
Hello
I would like to be on list 2 with a (1) kit without enclosure , shipping to France .
bardzo dziękuję za to działanie.....
73 / 44 od Patrick Skibinski F1LPT
I would like to be on list 2 with a (1) kit without enclosure , shipping to France .
bardzo dziękuję za to działanie.....
73 / 44 od Patrick Skibinski F1LPT
-
- Posts: 7
- Joined: 31 Dec 2021, 09:12
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hello,Adam SN3AK wrote: ↑05 Jan 2022, 09:39Dear Ady YO8AZQ - thanks for information.YO8AZQ wrote: ↑04 Jan 2022, 22:26Hello!EA5HQ wrote: ↑04 Jan 2022, 18:25
Hi Adam
My 3D printer software (Cura) tells me 46g of filament. Call that 50. Let's say I get 20% print #fails (typical for me). So allow 60g. Let's say I can get 16 sets from a 1kg spool of filament. My current favourite source for filament is Amazon Basics which I believe is made by Mitsubishi in Netherlands. It's quite a good price / quality / availability combination for me here in rural Spain. It's currently around €22 a 1kg reel. So, just in filament, the enclosure should be about €1.38. Let's say my printer uses 200W on average while printing, and the Cura software says 5h 16m to print - I'll round that up to 6. Electricity in Spain is eye-wateringly expensive at the moment compared to what it used to be just 2 years ago, but I'll say that it costs €0.60 in electricity to print. Allow some wear and tear on the printer at €0.50 per set. Plus €1 per kit for the shipping when combined for the batch of 30. Grand total current estimate is, say, €3.50 per enclosure in costs.
Cheers
Marcus
We organized a group of 10 in Romania (closed on December 23). I listed 8 boxes. So the estimates are correct. The only problem is, at least for me, the size. I checked with a DL2MAN sandwich board and it needed a 1.01 size increase. Not much, but enough not to fit the plates in the box. The problem may be that I used PLA, from my printer or ... I don't know from where. So the recommendation is to check the first box very carefully!
Ady / YO8AZQ
Dear Markus,
Thank you for update. I will round up the enclosure cost to 5 EUR. I do not see you added cost of shipment or not.
Please send picture of the first printed enclosure to this forum - let's all see it before they take decision.
I though about the total price and came up with following conclusions:
1 kit with assembled SMD parts + all remaining parts - 50 EUR
Additional cost for shipment out of Poland (EU only) - 6 EUR
Enclosure 5 EUR
My calculation are based on information from DL2MAN, Polish Post, Allegro ("polish ebay").
I do my best to fit in this budget, assuming that PL Tax/Duties are comparable with DE/EU ones.
What is next step:
Expect personal data survey on weekend.
Best regards,
Adam
For those who send registration after closure - I will add you on the list for Group 2.
Name : Alain
Call: EA3ATJ
I'm interested in buying 1 complete kit + Enclosure, if you can send it to SPAIN
73's
-
- Posts: 1
- Joined: 05 Jan 2022, 14:43
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hi Adam,Adam SN3AK wrote: ↑05 Jan 2022, 09:39
For those who send registration after closure - I will add you on the list for Group 2.
I would also kindly like to apply for Group 2, if it takes places some day.
Call: DL1TSM
1 Kit without Enclosure
Kindest Regards,
Timo, DL1TSM
-
- Posts: 5
- Joined: 04 Jan 2022, 07:35
Re: PL/EU Group Buy #PLGROUPBUY - SN3AK
Hello,
maybe we can help and send you our data per mail?
73 de Florian, OE3FSA
-
- Posts: 12
- Joined: 31 Dec 2021, 07:17
Re: PL/EU Group Buy - SN3AK - **FULL/CLOSED FOR ORDERS**
hello Adam,
could you please provide us your email to send you our contact details. Please inform us for your PayPal account
could you please provide us your email to send you our contact details. Please inform us for your PayPal account
Users browsing this forum: No registered users and 32 guests