Today I have made PSK 31 the first timet. For the connection AUDIO /MIC I made a cable to the SignaLink that fits in a case, created in 3D printing, in the (tru)SDX.
If interested, I can send the stl. file
---
Mod edit: Moved to general forum.
PSK 31
-
- Posts: 22
- Joined: 31 Dec 2021, 10:01
-
- Posts: 2
- Joined: 02 Apr 2022, 17:13
PSK31 on 30M
Hi:
I would like to know if any users have had any success in using the (tr)uSDX with PSK31 and what the setup is they used. I plan to use this for PSKMail on 10.148
73's
Mark, K7VQU
I would like to know if any users have had any success in using the (tr)uSDX with PSK31 and what the setup is they used. I plan to use this for PSKMail on 10.148
73's
Mark, K7VQU
-
- Posts: 2
- Joined: 02 Apr 2022, 17:13
Re: PSK 31
How did your connector work for you and did you make any PSK31 Contacts yet? I am curious on how the performance was as I would like to use the (tr)uSDX for PSK Mail on 30M
73's
Mark, K7VQU
73's
Mark, K7VQU
-
- Posts: 22
- Joined: 31 Dec 2021, 10:01
Re: PSK 31
Hi Mark, sorry for late answer, just now I see your question.
Yes I had contact with PSK 31 on 40m band.
I connect the (tr)uSDX to SignaLink USB and use fldigi on a raspberry PI.
73´s
Franz, DF5GF
Yes I had contact with PSK 31 on 40m band.
I connect the (tr)uSDX to SignaLink USB and use fldigi on a raspberry PI.
73´s
Franz, DF5GF
-
- Posts: 23
- Joined: 01 Jan 2022, 01:12
Re: PSK 31
Hi Mark,
I have been using FT8 and JS8Call for a little while now and works great. I know it isn't PSK31 but the same setup is required. I run this on a Raspberry Pi 3 with USB soundcard and USB CAT control. Admittedly I haven't successfully got FLRIG to work yet so your route to PSK31 software could be an issue.
Good luck,
73 Ellis M5AEI
I have been using FT8 and JS8Call for a little while now and works great. I know it isn't PSK31 but the same setup is required. I run this on a Raspberry Pi 3 with USB soundcard and USB CAT control. Admittedly I haven't successfully got FLRIG to work yet so your route to PSK31 software could be an issue.
Good luck,
73 Ellis M5AEI
-
- Posts: 49
- Joined: 31 Dec 2021, 00:51
- Location: Esposende - Portugal
Re: PSK 31
is it possible to get the files to print one or two of this connectors.
Tank you.
73 de Pedro CT7ARQ
"There are three sorts of people: those who are alive, those who are dead, and those who are at sea"
-
- Posts: 24
- Joined: 06 Feb 2022, 08:28
- Location: Edgewater, FL
Re: PSK 31
Would you please share your .STL files or point me to a location to find them.
Thank you,
Bill-W3SI
Users browsing this forum: k4djg and 1 guest