(tr)uSDX - Alternative Band Setups available
-
- Posts: 52
- Joined: 18 Apr 2022, 19:33
Re: (tr)uSDX - Alternative Band Setups available
Hi.
Ive got some success today. On the 80 meter band there was an open circuit cap giving no output, and on 15 one cap was way off value. The caps are Yaego manufacture. Been tweeking coils and small changes to caps and now getting between 65 and 70% on all bands so getting there.
One question, the SWR reading is around 1.25 to 1.5 on all bands into a dummy load and the SWR Bridge needle doesn't move, what would cause the issue and could this give a low efficiency reading as well?
Ive got some success today. On the 80 meter band there was an open circuit cap giving no output, and on 15 one cap was way off value. The caps are Yaego manufacture. Been tweeking coils and small changes to caps and now getting between 65 and 70% on all bands so getting there.
One question, the SWR reading is around 1.25 to 1.5 on all bands into a dummy load and the SWR Bridge needle doesn't move, what would cause the issue and could this give a low efficiency reading as well?
Regards, Trevor. MM0KJJ
-
- Posts: 7
- Joined: 10 Jun 2022, 19:25
Re: (tr)uSDX - Alternative Band Setups available
Before too much work goes in to fine-tuning these values, would it be possible to re-arrange the filter numbering so that bands shared between configurations use the same spots? Something like this:
This configuration would make it easier to modify existing RF boards into a new configuration, and I don't see any downside (besides confusion among the few people who have built alternate RF boards so far).
Now would be the time to make the change, as it will only become more confusing as time goes on.
Code: Select all
Proposed (!!) Assignment K1 K2 K3 K4 K5
Lo (current Standard) 20m 30m 40m 60m 80m
Hi (Only Hi Bands) 20m 10m 12m 15m 17m
Classic (Classical Bands w/o WARC) 20m 10m 40m 15m 80m
Now would be the time to make the change, as it will only become more confusing as time goes on.
-
- Posts: 52
- Joined: 18 Apr 2022, 19:33
Re: (tr)uSDX - Alternative Band Setups available
I belive the issue is the layout of the board and what bands are selected. The higher the frequency the nearer that band has to be to the SWR transformers and antenna connection to keep trace inductance at a minimum.agrif wrote: ↑21 Jun 2022, 23:00 Before too much work goes in to fine-tuning these values, would it be possible to re-arrange the filter numbering so that bands shared between configurations use the same spots? Something like this:
This configuration would make it easier to modify existing RF boards into a new configuration, and I don't see any downside (besides confusion among the few people who have built alternate RF boards so far).Code: Select all
Proposed (!!) Assignment K1 K2 K3 K4 K5 Lo (current Standard) 20m 30m 40m 60m 80m Hi (Only Hi Bands) 20m 10m 12m 15m 17m Classic (Classical Bands w/o WARC) 20m 10m 40m 15m 80m
Now would be the time to make the change, as it will only become more confusing as time goes on.
Regards, Trevor. MM0KJJ
-
- Posts: 180
- Joined: 01 Jan 2022, 16:30
Re: (tr)uSDX - Alternative Band Setups available
While I understand the thought behind it, this, IMO, is a horrible idea.agrif wrote: ↑21 Jun 2022, 23:00 Before too much work goes in to fine-tuning these values, would it be possible to re-arrange the filter numbering so that bands shared between configurations use the same spots? Something like this:
This configuration would make it easier to modify existing RF boards into a new configuration, and I don't see any downside (besides confusion among the few people who have built alternate RF boards so far).Code: Select all
Proposed (!!) Assignment K1 K2 K3 K4 K5 Lo (current Standard) 20m 30m 40m 60m 80m Hi (Only Hi Bands) 20m 10m 12m 15m 17m Classic (Classical Bands w/o WARC) 20m 10m 40m 15m 80m
Now would be the time to make the change, as it will only become more confusing as time goes on.
73,
Robert, WA2T
-
- Posts: 7
- Joined: 07 Feb 2022, 13:50
Re: (tr)uSDX - Alternative Band Setups available
Does Beta firmware support alternative band setups? (I only can flash via ISP)
-
- Posts: 28
- Joined: 31 Dec 2021, 16:21
Re: (tr)uSDX - Alternative Band Setups available
Any idea when the alternative RF boards will be available?
-
- Posts: 706
- Joined: 30 Dec 2021, 19:18
- Contact:
Re: (tr)uSDX - Alternative Band Setups available
I would have said any day, but Sunny announced she´s going to holidays now. So I assume we will have to wait a few more weeks.
73 Manuel; DL2MAN
73 Manuel; DL2MAN
-
- Posts: 5
- Joined: 20 Feb 2022, 21:04
- Location: Medway, OH USA
Re: (tr)uSDX - Alternative Band Setups available
Looking forward to the day when the option board(s) become available. Between mine & Piero Begali’s radios, that’s at least three radios might be “updated.” Such a sweet design.
73 de W8IJN
73 de W8IJN
Nils / W8IJN
-
- Posts: 15
- Joined: 12 Jul 2022, 17:00
Re: (tr)uSDX - Alternative Band Setups available
W8IJN,
Perhaps that day has arrived.
https://www.aliexpress.com/item/3256804 ... 18020TzSwZ
73
KA6VPJ
Perhaps that day has arrived.
https://www.aliexpress.com/item/3256804 ... 18020TzSwZ
73
KA6VPJ
-
- Posts: 133
- Joined: 21 Mar 2022, 00:04
- Location: Illinois, USA
Re: (tr)uSDX - Alternative Band Setups available
That link worked, thanks, I ordered one of each board!BrumasterM01 wrote: ↑25 Aug 2022, 15:19 W8IJN,
Perhaps that day has arrived.
https://www.aliexpress.com/item/3256804 ... 18020TzSwZ
73
KA6VPJ
73
AC9YY
Jim
- ve2rn
- Posts: 55
- Joined: 13 Jan 2022, 20:45
Re: (tr)uSDX - Alternative Band Setups available
Do the boards have been tested and approved ? and what are the performance results? I have ordered boards anyway but if some tests results are available i will be interested
Sylvain Naud
VE2RN
VE2RN
-
- Posts: 24
- Joined: 06 Feb 2022, 08:28
- Location: Edgewater, FL
Re: (tr)uSDX - Alternative Band Setups available
I was chatting with Sunny this evening and she sent me the link. I ordered a HI band and Classic band RF boards. I own (5) (tr)uSDX radios and will have one of each variety and an unbuilt LO band as a back-up.
Bill -W3SI
Bill -W3SI
-
- Posts: 69
- Joined: 12 Aug 2022, 09:15
Re: (tr)uSDX - Alternative Band Setups available
Wow, thanks for the good news. Just ordered Classic board.
-
- Posts: 1
- Joined: 13 Oct 2022, 01:13
Re: (tr)uSDX - Alternative Band Setups available
will there be a (tr)uSDX that does 10M, 6M, 2M, 1.25M, & 70cm as i would love to get one that does and has the all modes like the current ones?
-
- Posts: 69
- Joined: 12 Aug 2022, 09:15
-
- Posts: 5
- Joined: 02 Dec 2022, 20:47
Re: (tr)uSDX - Alternative Band Setups available
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Okay, as a Technician license, at first, although I LOVE THIS RADIO!!!! I was also a bit sad that I was so limited, but this Alternative Band Setup.... IS GLORIOUS!!! I am so glad your forum is here and that you guys include so much information, and very useful and good information!!! You are running your customer support better than any company I've ever seen in any industry!!! So I thought I wouldn't be able to do 10 Meters, and yet, here I am, with a big grin on my face, doing 10 Meters! Well done!!!
-
- Posts: 10
- Joined: 08 Sep 2022, 21:07
Re: (tr)uSDX - Alternative Band Setups available
I managed to make a FT8 contact on 15 meters from Honolulu Hawaii to Banaba Island (T33T) with the hi band trusdx version and an end fed half wave from my hotel Lanai. Thanks for the great portable design.
Jay KE7OT
Jay KE7OT
-
- Posts: 2
- Joined: 22 Oct 2022, 12:12
Re: (tr)uSDX - Alternative Band Setups available
Hello Manuel,DL2MAN wrote: ↑20 May 2022, 13:00 I´ve updated my Classic Band Table. I did not change any Values (exept for Typo -initially suggesting to use wrong Toroid Type on 15m), but I changed the measurement results, as I could achieve 80% and more on all Bands by Setting it to PA Bias Max 160. The FDT86256 FET has a higher gate threshold and requires more Bias.
The tested Board also has the T2 Modification (3:21)
Back.JPG
Front.JPG
73 Manuel; DL2MAN
I ordered the classic band and don't know which suggestion is the latest concerning the turns of the toroids. Please also check the schematic for classic bands on your site https://dl2man.de/2-trusdx-assembly/. The schematic seems to be more up to date (2022-06-04) than your post I am referring to. The suggestions for the turns of the toroids are deffering. Which suggestion is the latest for the classic band?
Best regards. Pascal, DO1LZ.
-
- Posts: 706
- Joined: 30 Dec 2021, 19:18
- Contact:
Re: (tr)uSDX - Alternative Band Setups available
You've answered the question yourself.
The forum post was pre-release. The schematic is newer and contains the latest values.
73 Manuel DL2MAN
The forum post was pre-release. The schematic is newer and contains the latest values.
73 Manuel DL2MAN
-
- Posts: 69
- Joined: 12 Aug 2022, 09:15
Re: (tr)uSDX - Alternative Band Setups available
Just smoked my Lo PA board )) PA bias was set to 160, since last week I was building and tuning Classic board. Today I swapped it back to Lo and forgot to change bias back to 128. Bingo! One of bs170 has magic smoke came out.
Just be aware to check your settings when you swap PA boards))
Users browsing this forum: No registered users and 3 guests