RX Problem on RF board, TX fine Efficiency and Power

[SY1DRO]

Hello, I have two rf boards, one receives well and txs well and one that does not rx like at all but for some reason it does tx well, I switched PA and checked loose solder joints, what component failures could cause this? This is all on the same main board.

[SY1DRO]

I should add I did try connecting coax directly to the rf pin on the mainboard and it does rx well

[SY1DRO]

Tracing the RF path it seems that this trace was broken somewhere so I repaired it RF to Choke

firefox_sMbPJCjFI0.png (21.4 KiB) Viewed 145 times

Here is irl

0-02-05-893b2f0690cbfcdafdedc2eb72bbbc932890221366b3f70a6a94620a01f7265f_185e31de747c2a83.jpg (234.05 KiB) Viewed 145 times

For some reason the trace was broken from the pcb manufacturer.