Manny,
My TruSDX has all of a sudden stop receiving anything but band noise. I have it connected to the same antenna as my main station radio (TS-590). I checked the swr, and it is 1.2:1. CW signals on the 590 are running S5- S7, but I cannot hear them on the TruSDX. Could you please reply with anything I should check.
I re-ran your instruction video on all the settings and mine are correct. My serial number is:
553046554A550A9B71. Thank you. Brian Hunsaker - W5YE
Receive issue with the TruSDX
-
- Posts: 719
- Joined: 30 Dec 2021, 19:18
- Contact:
Re: Receive issue with the TruSDX
Please don´t call me Manny, don´t send me private messages or emails, if you don´t get replies. Instead try pushing here or use the search function to look for postings with similar problems.
Regarding your issue:
Was the SWR confirmed with (tr)uSDX or with another device ?
First guess would be broken cable or adapter. This can be excluded if (tr)uSDX shows SWR of 1.2:1.
If excluded: Do a full reset (Press and hold rotary button, while powering up)
If excluded: re-install firmware and do a full reset again
if that all does not solve the issue, you need to go into hardware troubleshooting with signal generator and oscilloscope.
By the way: All of this has been adressed plenty of times. Before posting, I suggest using the search function of the forum.
73 Manuel; DL2MAN
Regarding your issue:
Was the SWR confirmed with (tr)uSDX or with another device ?
First guess would be broken cable or adapter. This can be excluded if (tr)uSDX shows SWR of 1.2:1.
If excluded: Do a full reset (Press and hold rotary button, while powering up)
If excluded: re-install firmware and do a full reset again
if that all does not solve the issue, you need to go into hardware troubleshooting with signal generator and oscilloscope.
By the way: All of this has been adressed plenty of times. Before posting, I suggest using the search function of the forum.
73 Manuel; DL2MAN
Users browsing this forum: g0myw and 0 guests