Netherlands group buy - ***looking for leader***
Posted: 01 Jan 2022, 05:10
Looking for a Leader FOR DUTCH onley,
cause of limited time on this side....
cause of limited time on this side....
(tr)uSDX Forum
Netherlands group buy - ***looking for leader***
Page 1 of 2
Group. Uy Netherlands
Posted: 01 Jan 2022, 10:28
Re: Dutch buy
Posted: 01 Jan 2022, 12:53
Hoi Rene,
Ik ben zeker geïnteresseerd.
Weet je iets van een prijs, en moet je er 5 hebben.
Gaat toch wel om de laatste nieuwe versie?
Moet er nog wat zelf extra besteld worden buiten de PCB's en de behuizing.
De behuizing kan ik laten printen op mijn werk, er staan daar 6 3d printers.
Jan.
Ik ben zeker geïnteresseerd.
Weet je iets van een prijs, en moet je er 5 hebben.
Gaat toch wel om de laatste nieuwe versie?
Moet er nog wat zelf extra besteld worden buiten de PCB's en de behuizing.
De behuizing kan ik laten printen op mijn werk, er staan daar 6 3d printers.
Jan.
Re: Dutch buy
Posted: 01 Jan 2022, 18:26
Hallo Jan, ja en nee, haha, ik wil de printen bestellen zoals op de website van DL2man staat omschreven, plus de smd assemblage of zover de onderdelen daar voorradig zijn.PD0MVP wrote: ↑01 Jan 2022, 12:53 Hoi Rene,
Ik ben zeker geïnteresseerd.
Weet je iets van een prijs, en moet je er 5 hebben.
Gaat toch wel om de laatste nieuwe versie?
Moet er nog wat zelf extra besteld worden buiten de PCB's en de behuizing.
De behuizing kan ik laten printen op mijn werk, er staan daar 6 3d printers.
Jan.
Zelf wil ik 1 of 2 printen hebben, zoals het eruit ziet kost het naar mijn berekeningen ongeveer tussen de 110 en 135 euro voor 5 printen. Dus alle opties zijn nog open.
Het 3 printen tja mij neef heeft er ook 5 staan en die wil voor mij ook wel die printers aanzetten.
Groet,
Rene
PD0REB
Hoofddorp
Re: Dutch buy
Posted: 01 Jan 2022, 18:43
Please post in english. I know it´s convenient for you to continue in your native language, but since I´m legally responsible fo this form, I need to know when something is going down hill....
Thanks for your understanding
73 Manuel; DL2MAN
Thanks for your understanding
73 Manuel; DL2MAN
Re: Dutch buy
Posted: 01 Jan 2022, 18:52
Re: Dutch buy
Posted: 01 Jan 2022, 18:56
Okay Jan, in Englisch now made an calculation, total with shipping 186 euro's for 5 pcb's....so comes to 37 euro a pcbwith the most parts...already saw that not all the parts are availleble......so i think it is a litlle gambleRene wrote: ↑01 Jan 2022, 18:26Hallo Jan, ja en nee, haha, ik wil de printen bestellen zoals op de website van DL2man staat omschreven, plus de smd assemblage of zover de onderdelen daar voorradig zijn.PD0MVP wrote: ↑01 Jan 2022, 12:53 Hoi Rene,
Ik ben zeker geïnteresseerd.
Weet je iets van een prijs, en moet je er 5 hebben.
Gaat toch wel om de laatste nieuwe versie?
Moet er nog wat zelf extra besteld worden buiten de PCB's en de behuizing.
De behuizing kan ik laten printen op mijn werk, er staan daar 6 3d printers.
Jan.
Zelf wil ik 1 of 2 printen hebben, zoals het eruit ziet kost het naar mijn berekeningen ongeveer tussen de 110 en 135 euro voor 5 printen. Dus alle opties zijn nog open.
Het 3 printen tja mij neef heeft er ook 5 staan en die wil voor mij ook wel die printers aanzetten.
Groet,
Rene
PD0REB
Hoofddorp
Re: Dutch buy
Posted: 01 Jan 2022, 23:40
Hi Rene,
Depends on what is missing. I am not going to solder SMD parts.
I saw in the video of DL2MAN already one part to solder.
This was not so difficult, but smaller SMD parts will be a problem for me.
Depends on what is missing. I am not going to solder SMD parts.
I saw in the video of DL2MAN already one part to solder.
This was not so difficult, but smaller SMD parts will be a problem for me.
Re: Dutch buy
Posted: 02 Jan 2022, 10:00
Please count me in to any group buy.
It would be 1 kit of partly pre assembled boards and a case.
73 Dave de pa3glk
It would be 1 kit of partly pre assembled boards and a case.
73 Dave de pa3glk
Re: Dutch buy
Posted: 02 Jan 2022, 16:25
Hello everyone.
I am from Portugal but working on Den Helder.
If possible I would like to enter for 1 kit.
73's de Pedro CT7ARQ
I am from Portugal but working on Den Helder.
If possible I would like to enter for 1 kit.
73's de Pedro CT7ARQ
Re: Dutch buy
Posted: 02 Jan 2022, 17:44
Okay to the dutchy's, i hope this link wil work, you can see what i can order and what is missing. Make up your own dission if it works for you. If the link doesn't work let me know then i will try tomorrow to show it on a diffrent way
Regards
Rene
https://cart.jlcpcb.com/shopcart/cart?_ ... 6qEALw_wcB
Regards
Rene
https://cart.jlcpcb.com/shopcart/cart?_ ... 6qEALw_wcB
Re: Dutch buy
Posted: 02 Jan 2022, 19:51
Hello,
Please count me in for 1 device.
73 Ed
PA1TR
Please count me in for 1 device.
73 Ed
PA1TR
Re: Dutch buy
Posted: 02 Jan 2022, 20:04
The link works but it only shiws a blank shopping cart.
Re: Dutch buy
Posted: 02 Jan 2022, 21:10
It doesn't show anithing.
Can you provide a list of parts that jlpcb does not install?
I have a few smd parts from a 8band vervion that I can offer to the group.
Can you provide a list of parts that jlpcb does not install?
I have a few smd parts from a 8band vervion that I can offer to the group.
Rene wrote: ↑02 Jan 2022, 17:44 Okay to the dutchy's, i hope this link wil work, you can see what i can order and what is missing. Make up your own dission if it works for you. If the link doesn't work let me know then i will try tomorrow to show it on a diffrent way
Regards
Rene
https://cart.jlcpcb.com/shopcart/cart?_ ... 6qEALw_wcB
Re: Dutch buy
Posted: 03 Jan 2022, 03:15
Okay, now it is gonna be a long story, cause of extra work 
of my boss and some trouble in the family, i would not be able to continu this setup. sorry for this. Maybe in april/may. so maybe some one can take over.
There are some things you have to look after when you ordering.... some parts not availeble at JLPCB like 74ACT00.
Also, i don't know what the tax may do on the pcb's.
Regards Rene
of my boss and some trouble in the family, i would not be able to continu this setup. sorry for this. Maybe in april/may. so maybe some one can take over.There are some things you have to look after when you ordering.... some parts not availeble at JLPCB like 74ACT00.
Also, i don't know what the tax may do on the pcb's.
Regards Rene
Re: Dutch buy
Posted: 03 Jan 2022, 10:43
Re: Dutch buy
Posted: 03 Jan 2022, 14:46
No problem Luis.
Re: Netherlands group buy - ***looking for leader***
Posted: 03 Jan 2022, 16:08
Hello,
I live in France and I am interested buying a full kit too.
Let me know how we can proceed.
73
F4HKA Jeremy
I live in France and I am interested buying a full kit too.
Let me know how we can proceed.
73
F4HKA Jeremy
Re: Netherlands group buy - ***looking for leader***
Posted: 03 Jan 2022, 17:35
I like to participate for 1 pcs
73!
Pe1oev
73!
Pe1oev
Re: Netherlands group buy - ***looking for leader***
Posted: 04 Jan 2022, 08:22
Juts a thought; perhaps you can all join the : viewtopic.php?t=16 group buy.
We will almost reach the target of 50 if everyone here joins that group buy, and probably against a lower price if only 5/10/15 units are ordered.
The person how runs the group buy is going to ship across the EU.
I'm not trying to hijack this topic but since the topic started here mentioned that it will be hard for him to start very soon it seems like a reasonable option.
We will almost reach the target of 50 if everyone here joins that group buy, and probably against a lower price if only 5/10/15 units are ordered.
The person how runs the group buy is going to ship across the EU.
I'm not trying to hijack this topic but since the topic started here mentioned that it will be hard for him to start very soon it seems like a reasonable option.
Re: Netherlands group buy - ***looking for leader***
Posted: 04 Jan 2022, 09:14
I have already considered and went to that group. My last count was 10 kits left to the 50 mark.
pa4hjh wrote: ↑04 Jan 2022, 08:22 Juts a thought; perhaps you can all join the : viewtopic.php?t=16 group buy.
We will almost reach the target of 50 if everyone here joins that group buy, and probably against a lower price if only 5/10/15 units are ordered.
The person how runs the group buy is going to ship across the EU.
I'm not trying to hijack this topic but since the topic started here mentioned that it will be hard for him to start very soon it seems like a reasonable option.
Re: Netherlands group buy - ***looking for leader***
Posted: 04 Jan 2022, 12:06
Ik ben zeker geïnteresseerd in een group buy.
Kit en enclosure en alle onderdelen.
Zet mij svp op de lijst.
I am most definitely interested in 1 kit, complete with enclosure and all items.
Shipping to the Netherlands.
Put me on the list please.
73 Roel
Kit en enclosure en alle onderdelen.
Zet mij svp op de lijst.
I am most definitely interested in 1 kit, complete with enclosure and all items.
Shipping to the Netherlands.
Put me on the list please.
73 Roel
Re: Netherlands group buy - ***looking for leader***
Posted: 05 Jan 2022, 00:18
Hi Rene,
Please count me in for 2 kits,
Thanks,
Oscar
Please count me in for 2 kits,
Thanks,
Oscar
Re: Netherlands group buy - ***looking for leader***
Posted: 05 Jan 2022, 01:29
Guys,
Renee posted on the 3rd January saying he is unable to run the group buy. At the moment, you are posting your requests for units to thin air.
One of you needs to step up and take leadership of this group buy and run it.
Re: Netherlands group buy - ***looking for leader***
Posted: 05 Jan 2022, 13:08
Hi Rene,
Count me in for 1 kit please!
Greetings from Amsterdam!
Count me in for 1 kit please!
Greetings from Amsterdam!