I am trying to diagnose the problem with my Aliexpress kit.
I am getting the following results:
Frequency Power Efficiency Amp Draw
Receive .09
3.56 .01w .71 % .192
5.31 .1 w 6.67 % .194
7.03 .09w 6.67% .198
10.1 .12w 8.3% .198
14.06 .11w 8.0% .20
I would appreciate some steps or tests I can try to figure out the problem. I have access to a Nanovna if that would prove useful at this stage.
Thanks
Bob
VA7RGM
Low power on 12v Aliexpress build
-
- Posts: 133
- Joined: 21 Mar 2022, 00:04
- Location: Illinois, USA
Re: Low power on 12v Aliexpress build
Does it receive okay?
-
- Posts: 6
- Joined: 31 Dec 2021, 15:17
Re: Low power on 12v Aliexpress build
It is receiving Ok. Tried 30 meters using the dummy load as an antenna.
-
- Posts: 10
- Joined: 03 Apr 2022, 09:52
-
- Posts: 133
- Joined: 21 Mar 2022, 00:04
- Location: Illinois, USA
Re: Low power on 12v Aliexpress build
Apparently that does not make a difference in CW where the power is checked. I tried a TX Drive of 0 and my output power was unchanged.sq9gin wrote: ↑22 Apr 2022, 18:44 First, check menu 3.3
https://dl2man.de/4-trusdx-manual/
Krzysztof
-
- Posts: 9
- Joined: 31 Mar 2022, 21:24
Re: Low power on 12v Aliexpress build
I had similar problems. Check again if coils have enough windings and if they are soldered properly. Then if this doesn't help it is probably FETs that are faulty or at least one of them.
Check the topic with problem that I had: viewtopic.php?t=292
Check the topic with problem that I had: viewtopic.php?t=292
73 de S53SL
Users browsing this forum: No registered users and 23 guests