I just fired up my tr(usdx) for the first time. It tranmits just fine. However, the receiver is virtually deaf. I can faintly hear a CW signal from my other radio but no other signals. Can someone suggest where to start trying to fix this deafness?
Tnx es 73 de Arnie W8DU
NO receive. Transmit OK
-
- Posts: 52
- Joined: 18 Apr 2022, 19:33
Re: NO receive. Transmit OK
Go through the menu and check the attenuator settings, in your case set both to 0db, make sure the AGC is on and the volume at 9 or 10, try also with headphones as the internal speaker isn't great or could be faulty.
Regards, Trevor. MM0KJJ
-
- Posts: 133
- Joined: 21 Mar 2022, 00:04
- Location: Illinois, USA
Re: NO receive. Transmit OK
Check the soldering on all the ICs.
-
- Posts: 14
- Joined: 09 Mar 2022, 00:22
Re: NO receive. Transmit OK
Thank you for your suggestions. I tried all of the above, but unfortunately, to no avail. Does anyone have any other suggestions as to why transmit, but not receive works? I do hear noise and a loud birdie at 7.202 LSB, if that means anything.
Tnx de Arnie W8DU
Tnx de Arnie W8DU
-
- Posts: 709
- Joined: 30 Dec 2021, 19:18
- Contact:
Users browsing this forum: No registered users and 0 guests