No Input Into Mic Jack
Posted: 08 Nov 2022, 20:14
Hello Folks, I have really enjoyed building this great rig and have not run into any real problems until now, as I am setting it up for digital modes. In WSJT-X, CAT is working fine, and it is receiving fine. However, I cannot get it to transmit. I wired the cable as per Manuel's instructions, but still nothing transmits. The CAT switches the radio into transmit mode, and the "T" appears in the display. But nothing goes out. I tried switching to VOX to see if that would do it, but it still failed to transmit anything. To check the cable, I unplugged it from the radio and plugged it into an amplified speaker, then hit the "Tune" button in WSJT-X. A nice clear tone played in the amplified speaker. So I know I have a tone out, the cable is working, and the CAT handles putting the radio into transmit mode just fine. There is just nothing going through the mic input. I am hoping someone might be able to point me in the right direction.
Thanks,
Jim
Thanks,
Jim