Page 1 of 1
PSK 31
Posted: 24 Jan 2022, 16:30
by Df5GF
Today I have made PSK 31 the first timet. For the connection AUDIO /MIC I made a cable to the SignaLink that fits in a case, created in 3D printing, in the (tru)SDX.
If interested, I can send the stl. file
---
Mod edit: Moved to general forum.
Re: PSK 31
Posted: 25 Jan 2022, 10:32
by Df5GF
Picture of PSK plug
PSK31 on 30M
Posted: 02 Apr 2022, 17:17
by mrlocksmith
Hi:
I would like to know if any users have had any success in using the (tr)uSDX with PSK31 and what the setup is they used. I plan to use this for PSKMail on 10.148
73's
Mark, K7VQU
Re: PSK 31
Posted: 03 Apr 2022, 19:31
by mrlocksmith
How did your connector work for you and did you make any PSK31 Contacts yet? I am curious on how the performance was as I would like to use the (tr)uSDX for PSK Mail on 30M
73's
Mark, K7VQU
Re: PSK 31
Posted: 12 May 2022, 14:16
by Df5GF
Hi Mark, sorry for late answer, just now I see your question.
Yes I had contact with PSK 31 on 40m band.
I connect the (tr)uSDX to SignaLink USB and use fldigi on a raspberry PI.
73´s
Franz, DF5GF
Re: PSK 31
Posted: 12 May 2022, 22:49
by M5AEI
Hi Mark,
I have been using FT8 and JS8Call for a little while now and works great. I know it isn't PSK31 but the same setup is required. I run this on a Raspberry Pi 3 with USB soundcard and USB CAT control. Admittedly I haven't successfully got FLRIG to work yet so your route to PSK31 software could be an issue.
Good luck,
73 Ellis M5AEI
Re: PSK 31
Posted: 03 Sep 2022, 18:10
by CT7ARQ
Df5GF wrote: ↑25 Jan 2022, 10:32Picture of PSK plug
is it possible to get the files to print one or two of this connectors.
Tank you.
73 de Pedro CT7ARQ
Re: PSK 31
Posted: 23 Sep 2022, 01:12
by W3SI
Df5GF wrote: ↑24 Jan 2022, 16:30
Today I have made PSK 31 the first timet. For the connection AUDIO /MIC I made a cable to the SignaLink that fits in a case, created in 3D printing, in the (tru)SDX.
If interested, I can send the stl. file
Would you please share your .STL files or point me to a location to find them.
Thank you,
Bill-W3SI